Prerequisite: 1) You have received a valid installation image from Ferncast. If you do not have one currently, please contact support@ferncast.de.
| ! | As boot/installation medium, Ferncast recommends a USB drive, which has been turned into a bootable medium via Rufus or similar applications. See the related section below for details on how to format the USB drive in Rufus. |
| ! |
If you are not sure how to enter the boot menu of the hardware system you want to install aixtream on:
|
Once you have installed aixtream on the hardware system, you can access the web UI from a computer in the same network via web browser. Use the set IP of the aixtream system. LAN1 is set to DHCP by default (unless changed during installation, see above). LAN2 (if available) uses 10.0.0.11.
| L | See here for further details on initial network configuration. |
Prerequisite: You have downloaded Rufus and the USB drive is ready and connected to your PC.
Start Rufus and set the following settings in Rufus:
| Installation topics |
| Login |
| Network access |
| License import |
| Virtualization |
| Containerization |
| Port configuration |